Atmospheric storage tanks at production sites generate vapor every day through flashing, working losses and breathing losses. In many cases, the most practical way to control those emissions is a combustion device sized for the tank battery. For engineers and facility managers comparing options in 2026, choosing the right unit means balancing destruction efficiency, flow range, monitoring requirements and long term maintenance.

Why Tank Vapors Need Control

When produced oil or condensate moves from a pressurized separator into an atmospheric tank, dissolved light hydrocarbons flash out of solution. More vapor is released as tanks fill and as temperatures change during the day. These vapors contain methane and volatile organic compounds that fall under EPA OOOOa and OOOOb rules, along with state programs in Texas, New Mexico, Colorado, North Dakota and Oklahoma.

Operators have two broad choices: recover the vapor with a vapor recovery unit and send it to sales, or destroy it in a control device. Recovery makes sense when volumes are steady and a gas outlet is available. When flows are low, highly variable or there is no economic outlet, a tank vapor combustor is often the most reliable answer.

How an Enclosed Tank Vapor Combustor Works

An enclosed combustor burns tank vapors inside an insulated stack, which hides the flame and reduces radiant heat and visible emissions. Vapors are piped from the tank headers through a flame arrester and often a liquid knockout before reaching the burner. A continuous or intermittent pilot provides ignition, and a monitoring device such as a thermocouple confirms that the pilot or flame is present.

Key Design Features

  • Turndown range, since tank vapor flow can swing from near zero to peak during dump events.
  • Low pressure burners that work with the few ounces of pressure available from tank systems.
  • Flame arresters to prevent flashback into the tanks.
  • Pilot monitoring and alarms that support recordkeeping requirements.
  • Manufacturer performance testing to document destruction efficiency.

Sizing a Combustor for Your Tank Battery

Accurate sizing starts with a reasonable estimate of vapor generation. Engineers typically use process simulation, flash gas sampling or approved calculation methods. Important inputs include separator pressure, oil and condensate throughput, API gravity and seasonal temperatures. Undersized units cause back pressure that can open thief hatches and pressure relief valves, which defeats the purpose of control. Oversized units can struggle with stability at very low flows unless they have good turndown.

It is also worth planning for the future. Production declines over time, but new wells on the same pad can push vapor volumes back up. Designing for a realistic range, rather than a single point, keeps the device in compliance through several years of operation.

Tank System Integrity Matters

A combustor can only destroy vapors that actually reach it. Leaking thief hatches, worn gaskets and undersized vapor piping all allow emissions to escape before reaching the burner. Many recent enforcement actions focus on these closed vent system issues rather than the combustion device itself. Regular optical gas imaging surveys help find problems early.

Combustor vs Flare vs Vapor Recovery

Each option has a place. Open flares handle very large and variable flows but produce visible flame and may face local restrictions. Enclosed combustors hide the flame and are popular near homes, roads and other sensitive areas. Vapor recovery units capture value from the gas but need power, maintenance and a sales outlet. Many sites combine a recovery unit with a combustor as backup during downtime. A supplier that builds all three, such as Hero Process Solutions in Kellyville, Oklahoma, can help weigh the tradeoffs for a specific pad instead of pushing one technology.

Maintenance Practices That Keep Units Compliant

  • Check pilot operation and monitoring signals during every site visit.
  • Inspect and clean flame arresters on a regular schedule.
  • Drain liquid knockouts so liquids never reach the burner.
  • Verify that alarm and data logging systems record properly.
  • Look for refractory or insulation damage on the stack.

Keeping spare igniters, thermocouples and arrester elements on hand reduces downtime, which matters because periods without a lit pilot may count as deviations.

Frequently Asked Questions

What destruction efficiency do tank vapor combustors achieve?

Many units are designed and tested to achieve 95 percent or higher destruction of VOCs and methane. Some rules now expect higher performance with continuous monitoring. Always confirm what your permit and the applicable rule require.

Do enclosed combustors need electricity?

Many tank combustors run on solar power or very small loads for igniters and monitoring. Units with blowers or advanced controls need more power. Remote sites often rely on solar panels with battery storage.

Can one combustor handle multiple tank batteries?

It is possible if vapor piping and pressure drop are designed carefully. Distance and back pressure are the main limits. Most operators prefer a unit near each tank battery for reliability.

How often should a combustor be inspected?

Monthly inspections are common, with pilot status checked more frequently through remote monitoring. Rules under OOOOb add specific inspection and monitoring expectations. Keep logs to show compliance.